iSpiider®
Unlike other spiders, our new IP65 rated iSpiider®, with its highly advanced protective design, is perfectly happy to play in the rain!
Light source
1x 60W RGBW and 18x 40W RGBW LED multichips
Light output
13.100 lm, 49.000 lx @ 5m
Zoom range
4° - 50°
Effects
pixel control, MCFE™ - Multi-Coloured Flower Effects (patented), virtual colour wheel, tungsten lamp effect, preprogrammed pixel effects
Ideally suited for festivals, concerts and outdoor events, or any scenario needing to deal with inclement or unpredictable weather, the iSpiider® is a bright, high-performance rated WashBeam luminaire, retaining all the favourite features of its phenomenally successful indoor relative, the Spiider®.
Designed, developed, and manufactured, to be sealed against water and particle ingress, thereby strictly adhering to their IP65 rating, you can be confident of both its protection and performance.
Their aluminium housing gives a dust-free environment for the optics, eliminating the need for frequent cleaning and routine maintenance.
By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app.
iSpiider® uses the same 18 x 40-Watt, and 1 x 60-Watt LED source as the original, with the identical 12.5:1 zoom optical system, giving the same, tight 4° Beam to wide 50° Wash.
The unique Robe patented MCFE™ - Multi-Coloured Flower Effect, driven by the center 60W RGBW LED multichip, produces sharp, multicoloured spikes of light, rotating in both directions at variable speed, adding visual impact to any show.
All control protocols are present, with dynamic video effects achieved by mapping individual pixels, controlled by DMX control desks, media servers via sACN with internal HTP merging, or Kling-Net.
Designed to be used indoors or out, we make fixture swap with the original Spiider® easy, as the DMX control channels, operating speeds, and feature set of both luminaires are identical.
iSeries – Robe reliability in all weathers.
Technical Specification
Source
Light source type: 1x 60W RGBW and 18x 40W RGBW LED multichips
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical system
Robe’s proprietary optical design
High-efficiency zoom optical system, ratio 12,5:1
Zoom range: 4° - 50°
Fixture total lumen output:
13.100 lm (integrating sphere)
10.500 lm (goniophotometer)
Illuminance: 49.000 lx @ 5 m
(RLCT™) Innovative lens coating technology (Patent pending)
Dynamic Effects and Features
Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
White light: Variable CCT 2.700K - 8.000K
DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
Colour rainbow effect with variable speed
MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
Innovative Flower Effect: rotating in both directions at variable speed (Patented)
Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
POLAR+™ for power saving and instant operation in extremely cold weather conditions
Control and programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, built-in analyser for easy fault finding, NFC app controller
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
Wireless CRMX™ technology from Lumen Radio
Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity
REAP™ - Robe Ethernet Access Portal
RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance
DMX Protocol modes: 10
Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123
Pan & Tilt resolution: 16 bit
R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)
Zoom: 8 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movement
Pan movement: 540°
Tilt movement: 220°
Movement control: Standard and Speed
Controllable speed of Pan & Tilt movement
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)
Automatic Pan & Tilt position correction
Thermal specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 75°C (167°F)
Minimum operating temperature: -10°C (14°F)
Total heat dissipation: max. 1614 BTU/h (calculated)
Electrical specification and connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: max. 660 W
Power connector in: IP65 Neutrik powerCON TRUE1
DMX and RDM data in/out: IP65 Locking 5-pin XLR connectors
Embedded Ethernet switch 10/100 Mbps: 1 x in / 1 x out
Ethernet port in: 2 x IP65 RJ45 connector
Approvals
CE Compliant
cETLus Compliant (pending)
Mechanical specification
Height:
534 mm (21.0”) – head in vertical position
595 mm (23.4”) – head in horizontal position
Width: 450 mm (17.7”)
Depth: 277 mm (10.9”)
Weight: 24.9 kg (54.9 lbs)
Ingress protection rating: IP65
Rigging
Mounting positions: Horizontally or vertically
Universal operating position
Mounting points: 2 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Safety cable attachment point
Tilt transport lock
Included items
User Manual
Omega Adaptor CL-regular 2 pcs
Power cord including powerCON TRUE1 In connector:
US: 13052277-01
EU: 13052276-01
Optional accessories
Doughty Trigger Clamp: 17030386
Safety wire 36 kg: 99011963
Single Top Loader Case: 10120277
Dual Top Loader Case: 10120278
Foam Shell: 20020416
Legal
iSpiider® is Registered Trademark of Robe lighting s. r. o.
iSpiider® is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents