BMFL™ FollowSpot LT
BMFL FollowSpot LT – A compact, affordable solution for the larger arena.
Light source
1700 W OSRAM Lok-it! HTI 1700/PS
Light output
34.600 lm, 455.000 lx @ 5 m
Zoom range
1° - 8°
Effects
CMY, 2 Colour wheels, Frost, Iris
Further adding to the ground breaking RoboSpot system, the FollowSpot LT is designed for the larger venue that requires a longer throw distance, tighter beam and greater output power. The LT is the same size and weight as the standard BMFL FollowSpot, which is substantially smaller than other products of similar power. The proprietary optical design provides a 8:1 zoom ratio (1 - 8 degrees) and an output exceeding 455,000 lux at 5 metres.
Like the standard BMFL FollowSpot, the LT can be operated as a manual, stand-alone follow spot using the Robe LightMaster-Side and LightMaster-Rear control kits. Similarly, the LT can be operated remotely using the Robe RoboSpot MDC remote follow spot system and is pre-wired for the Digital Camera.
Packed with all the features you would expect from a BMFL series product, including, imperceptible colour mixing, fixed colour filters, 6000K native colour temperature, Cri>92, Variable CTO to 2700 & CTB to 9000K, fixed & variable frost filters, focus, zoom and a fast iris.
Technical Specification
Source
Light source type: Compact short-arc metal halide lamp
Base: PGJX28
Approved model: OSRAM Lok-it! HTI 1700/PS
Lifetime: 750 hours @ 1700 W / 1500 W / Quiet mode
CRI: CRI 92+
Colour temperature: 6.000K
Control: Automatic and remote on/off
Ballast: Electronic
Optical system
Robe’s proprietary optical design
High - efficiency zoom optical system, ratio 8:1
Zoom range: 1° - 8°
Output lens diameter: 180 mm
Dichroic glass reflector for maximising the light efficiency
High efficient component optics
Fixture total lumen output:
34.600 lm @ 1700 W
32.180 lm @ 1500 W
28.370 lm @ 1200 W (Quiet mode)
Illuminance: 455.000 lx @ 5 m
Dynamic Effects and Features
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Variable CTO: 2.700 - 6.000 K
Colour Wheel 1: 6 fixed dichroic colours: deep red, deep blue, orange, green, magenta, congo blue + white
Colour Wheel 2: 6 replaceable "SLOT&LOCK" dichroic colours: pink, lavender, laser green, 9000 K CTB, minus half and minus green + white
Iris: Motorized, stepless, pulse effects up to 3 Hz
Frost: Variable Light, Medium plus repleceable Heavy (two another frosts included)
Motorized zoom and focus
Shutter: Separate dual blade system, variable strobe effect up to 10 Hz, full black out
Dimmer: Optimized dual blade system for exceptional smooth dimming
Control and programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
REAP™ - Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio - on request
DMX Protocol modes: 2
Control channels: 33, 27
Pan & Tilt resolution: 16 bit
CMY & CTO: 8 bit
Iris: 8 or 16 bit
Frost: 8 bit
Zoom: 8 or 16 bit
Focus: 8 or 16 bit
Dimmer: 8 or 16 bit
Movement
Pan movement: 540°
Tilt movement: 270°
Movement control: Standard and Speed
Controllable speed of Pan & Tilt movement
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)
Automatic Pan & Tilt position correction
Thermal specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 170°C (338°F)
Minimum operating temperature: -5°C (23°F)
Total heat dissipation: max. 5800 BTU/h (calculated)
Electrical specification and connections
Power supply: Electronic auto-ranging
Input voltage range: 200-240 V, 50/60 Hz
Power consumption: 2000 W at 230 V / 50 Hz
Power in connector: Neutrik powerCON
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in: RJ45
Approvals
cETLus Compliant
CE Compliant
Mechanical specification
Height: 813 mm (32") - Head in vertical position
Width: 483 mm (19)
Depth: 335 mm (13.2")
Weight: 38.1 kg (84.0 lbs)
Ingress protection rating: IP20
Rigging
Mounting positions: 0°, 32°, 90°
Universal operating position
Mounting points: 5 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Safety cable attachment point
Pan & Tilt transport locks
Included items
User Manual
Omega Adaptor CL-regular 2 pcs
Power cord including powerCON In connector
Optional accessories
Lamp Osram Lok-it HTI 1700/PS: 14080049
BMFL Handles - 2 pcs in box: 10980233
BMFL Side Handle: 10980396
RoboSpot Camera: 10080311
Doughty Trigger Clamp: 17030386
Safety wire 50 kg: 99011957
Single Top Loader Case: 10120226
Dual Top Loader Case: 10120227
Legal
BMFL™ is a trademark of Robe lighting s. r. o.
BMFL™ FollowSpot LT is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents