T1 PC™
T1 PC. The new ONE and only wash fixture you need for theatre, television and touring.
Light source
MSL™ 550 W Multi-Spectral LED engine
Light output
up to 13.000 lm, CRI 95+, + - Green Correction Function, Cpulse™ special flicker free management for HD and UHD cameras
Zoom range
7° - 50°
Effects
Beam Shaper (internal barndoors), Scrim Module
Specifically designed to fulfil the challenging requirements of these diverse applications within one wash fixture. The new revolutionary MSL™ (Multi-Spectral Light) LED engine provides an output reaching 13.000 lumens. It’s impressively bright.
Using either the Fresnel or PC lens supplied, T1 PC is full of theatrical subtlety. With CMY colour control, DataSwatch™ filters containing a selection of pre programmed colours via the new generation RCC™ (Robe Colour Calibration) algorithm and a wide ranging 2700K to 8000K CCT control - all variations of colour are possible for even the most demanding designers. The precise needs of theatrical dimming are catered to with our new L3™ Low Light Linearity dimming system. In addition, the high CRI of 95+ provides natural skin tones.
For television work, we have included a plus and minus green channel and Cpulse™ flicker-free source management for all vision systems such as HD and UHD cameras.
All this combined with our precise +/- 90° rotatable individually controlled internal barndoor system, a zoom range of 7° to 50°, beam shaper, graduated scrim with 180° rotation and light and medium frosts, the result is total control of your designs in theatre, television and touring.
You need only ONE. T1.
Technical Specification
Source
Light source type: MSL™ 550 W Multi-Spectral LED engine (Patented)
Colour rendition:
CRI: 95, CRI R9: 91, TM30-18 Rf: 93, TM30-18 Rg: 103, TLCI: 94
LED life expectancy: min. 40.000 hours
Typical lumen maintenance: L70/B50 @ 40.000 hours
Light source warranty: 3 years or 20.000 hours
Optical system
Robe’s proprietary optical design
High - efficiency zoom optical system, ratio 7:1
Zoom range: 7° - 50°
Fixture total lumen output:
13.000 lm (integrating sphere)
10.500 lm (goniophotometer)
Output lens diameter: 156 mm
Dynamic Effects and Features
Factory calibrated whites and colours via the new RCC™ (Robe Colour Calibration) system, automatic or on-call self-re-calibration of the LED engine without the use of any external tool (Patent pending)
Colour mixing: CMY/RGB or RGBAL
White light: Variable CCT 2.700K - 8.000K
DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)
+ - Green correction function
Adjustable CRI from 80 to 95+
4Door™ - Internal Barndoors with individual control of the four leaves for added beam control of wash light, with +/- 90° module rotation. (Patented)
MagFrost™ - Magnetic paddle fast change system providing exchangeable frosts containing as standard light 5° and medium 10° frost filters
RotaScrim™ - Internal Scrim module with graduated filter position control for asymmetrical style lighting of drapes and unwanted hotspot removal from scenery. The entire module can be rotated +/- 180°. (Patented)
Motorized zoom
Edge colour correction
Electronic strobe effect with variable speed up to 20 Hz
Pre-programmed random strobe & pulse effects
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Extremely quiet operation suitable for all types of production in Theatre and TV
Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.
Control and programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
REAP™ - Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio - on request
Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity - on request
DMX Protocol modes: 3
Control channels: 35, 24, 39
Pan & Tilt resolution: 16 bit
Colour mixing: 8 or 16 bit (internal 18 bit)
Variable CCT: 8 bit
Internal barndoor module movement & rotation: 8 bit
Internal scrim module movement & rotation: 8 bit
Frost: 8 bit
Zoom: 8 or 16 bit
Edge colour correction: 8 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movement
Pan movement: 540°
Tilt movement: 265°
Movement control: Standard and Speed
Controllable speed of Pan & Tilt movement
Automatic Pan & Tilt position correction
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)
MAPS™ - Motionless absolute positioning system for Pan & Tilt (Patented) - on request
Internal barndoors
Patented 4Door™ internal barndoors module:
Blades: 4 blades, each with separate movement control
Rotation: +/- 90° module rotation
Internal Scrim
Patented RotaScrim™ internal Scrim module:
Graduated filter position control
Rotation: +/- 180° of the entire module
Thermal specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)
Noise Levels
Sound pressure level:
24 dB(A) at 1 m (quiet mode)
30 dB(A) at 1 m (auto mode)
Sound power level:
32 dB(A) (quiet mode)
38 dB(A) (auto mode)
Electrical specification and connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: maximum 750 W at 230 V / 50 Hz (all LEDs On)
Typical power consumption: 160 - 215 W (one colour = full)
Power in connector: Neutrik powerCON TRUE1
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in: RJ45
Ethernet port in/out: RJ45 (instead of 3-pin XLR) for Embedded Epass™ switch 10/100 Mbps - on request
USB connector (series A) for lightmaster purposes
Approvals
CE Compliant
cETLus Compliant
Mechanical specification
Height: 712 mm (28") - head in vertical position
Width: 400 mm (15.7")
Depth: 258 mm (10.2") - head in vertical position
Weight: 22.6 kg (49.8 lbs)
Ingress protection rating: IP20
Rigging
Mounting positions: Horizontally or vertically
Universal operating position
Mounting points: 2 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Safety cable attachment point
Pan & Tilt transport locks
Included items
User Manual
Omega Adaptor CL-regular 2 pcs : 10980033
Power cord including powerCON TRUE1 In connector
Gel frame adaptor
Optional accessories
Gel frame: 10980452
Top hat: 10980535
Module of fresnel lens T1 PC: 10980450
Doughty Trigger Clamp: 17030386
Safety wire 36 kg: 99011963
Single Top Loader Case: 10120244-03
Dual Top Loader Case: 10120245-03
Foam Shell: 20020340-01
Legal
T1 PC™ is a Trademark of Robe lighting s. r. o.
T1 PC™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents