Tetra2™

TETRAgnatha’s are linear bars building on the Spiider and Tarrantula technology with TETRA2™ the uncompromising leader of the Tetra family.

Light source

18x 40 W RGBW LED multichips

Light output

10.500 lm

Zoom range

4° - 45°

Effects

2x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented), pixel control, virtual colour wheel, tungsten lamp effect

| ROBE lighting

Generating an ultra-tight 4° beam from each of the 18 pixels, they combine to produce a bright, defined “sheet” of light, desired by Lighting Designers. Seamless curtains of light can be constructed using several fixtures as the detailed design allows any combination of TETRA1™ and TETRA2™ to be placed end to end on stage or truss, whilst maintaining equal spacing between pixels. With the addition of two exclusive Robe patented MCFE™ – Multi-Coloured Flower Effects, the pixel-driven Tetra1 sets itself apart from others by projecting charismatic in- air animations.

The homogenised beams, together with the smooth 11:1 zoom, provide; a wash out to 45°, a footlight, a wall graze or dynamic in-air effects with fast paced sweeping movements. Utilizing our latest L3™ (Low Light Linearity) dimming system for an imperceptible fade to black, the 18-bit control provides ultra-smooth colour mixing across the full colour spectrum. An embedded Ethernet switch and wide range of protocols (sACN, Art-Net or Kling-Net) allow a quick network installation and ease of control from media servers, DMX or the internal effects engine.

Technical Specification

Source

Light source type: 18x 40W RGBW LED multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Robe’s proprietary optical design

Zoom range: 4°- 45°

Highly efficient component optics

Fixture total lumen output

  • 10.500 lm (integrating sphere)

  • 8.439 lm (goniophotometer)

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

Variable CCT: 2.700K - 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

2x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)

Motorized zoom

2 independent zoom zones

Pre-programmed random strobe & pulse effects

Electronic strobe effect with variable speed up to 20 Hz

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming

Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio - on request

DMX Protocol modes: 6

Control channels: 34, 56, 97, 115, 110, 128

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Tilt movement: 191°

16 bit movement resolution

Controllable speed of PTilt movement

Thermal specification

Maximum ambient temperature: 40°C (104°F)

Maximum surface temperature: 70°C (158°F)

Minimum operating temperature: -5°C (23°F)

Total heat dissipation: max. 2047 BTU/h (calculated)

Electrical specification and connections

Power supply: Electronic auto-ranging

Input voltage range: 100-240 V, 50/60 Hz

Power consumption: 600 W at 230 V / 50 Hz

Power in/out connector: Neutrik powerCON TRUE1 in/out

DMX and RDM data in/out: Locking 5-pin XLR

Ethernet port in/out: RJ45

Embedded Ethernet switch 10/100 Mbps

Mechanical specification

Height: 279 mm (10.98") - head in vertical position

Width: 1007 mm (39.6")

Depth: 143 mm (5.62") - head in vertical position

Weight: 18.1 kg (39.9 lbs)

Ingress protection rating: IP20

Rigging

Mounting points: 2 pairs of 1/4-turn locking points

2x Omega adaptors with 1/4-turn quick locks

Universal operating position

Safety cable attachment point

Included items

User Manual

Variable Omega Adaptor: 2 pcs 99016241-02

Power cord including powerCON TRUE1 In connector

Optional accessories

Diffusion filter: 2° 10980593

Clear lens cover: 10980606

Safety wire 36 kg: 99011963

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440

Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444

Single Top Loader Case: 10120259

Triple Top Loader Case: 10120264

Foam Shell: 20020371

Omega Adaptor CL-variable 2pcs in box: 10980550

Legal

Tetra2™ is a Trademark of Robe lighting s. r. o.

Tetra2™ is patented by Robe lighting s. r. o. and protected by one or more pending or issued patents