• Touring

  • TV

  • Theatre

  • Architecture

  • Events

  • Club

  • Church

  • Cruise ship

T1 Fresnel™

T1 Fresnel™

T1 Fresnel. The new ONE and only wash fixture you need for theatre, television and touring.

Specifically designed to fulfil the challenging requirements of these diverse applications within one wash fixture. The new revolutionary MSL™ (Multi-Spectral Light) LED engine provides an output reaching 10.000 lumens. It’s impressively bright.

Using either the Fresnel or PC lens supplied, T1 Fresnel is full of theatrical subtlety. With CMY colour control, DataSwatch™ filters containing a selection of pre programmed colours via the new generation RCC™ (Robe Colour Calibration) algorithm and a wide ranging 2700K to 8000K CCT control  - all variations of colour are possible for even the most demanding designers. The precise needs of theatrical dimming are catered to with our new L3™ Low Light Linearity dimming system. In addition, the high CRI of 90+ provides natural skin tones.

For television work, we have included a plus and minus green channel and Cpulse™ flicker-free source management for all vision systems such as HD and UHD cameras.

All this combined with our precise +/- 90° rotatable individually controlled internal barndoor system, a zoom range of 8° to 60°, beam shaper, graduated scrim with 180° rotation  and light and medium frosts, the result is total control of your designs in theatre, television and touring.

You need only ONE. T1.

  • Light source

    MSL™ 550 W Multi-Spectral LED engine

  • Light output

    up to 10.320 lm, CRI 90+, + - Green Correction Function, Cpulse™ special flicker free management for HD and UHD cameras

  • Zoom range

    8° - 60°

  • Effects

    Beam Shaper (internal barndoors), Scrim Module



  • Source

    • Light source type: MSL™ 550 W Multi-Spectral LED engine
    • LED life expectancy: min. 40.000 hours
    • Colour rendition:

      • CRI: 95, CRI R9: 91, TM30-18 Rf: 93, TM30-18 Rg: 103, TLCI: 94

    • Typical lumen maintenance: L70/B50 @ 40.000 hours
    • Light source warranty: 3 years or 20.000 hours
  • Optical System

    • Robe’s proprietary optical design
    • High - efficiency zoom optical system, ratio 7:1
    • Zoom range: 8° - 60°
    • Fixture total lumen output: 10.320 lm
    • Output lens diameter: 156 mm
  • Dynamic Effects

    • Factory calibrated whites and colours via the new RCC™ (Robe Colour Calibration) system, automatic or on-call self-re-calibration of the LED engine without the use of any external tool (Patent pending)
    • Colour mixing: CMY/RGB or RGBAL
    • White light: Variable CCT 2.700K - 8.000K
    • DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
    • Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)
    • + - Green correction function
    • Internal barndoors: individual position control of 4 “doors”, +/- 90° module rotation (Patent pending)
    • Scrim: Graduated filter position control, +/- 180° module rotation (Patent pending)
    • Frost: light 5° + medium 10°
    • Motorized zoom
    • Edge colour correction
    • Electronic strobe effect with variable speed up to 20 Hz
    • Pre-programmed random strobe & pulse effects
    • L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
    • Extremely quiet operation suitable for all types of production in Theatre and TV
    • Cpulse™ special flicker free management for HD and UHD cameras
    • AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.
  • Control and Programming

    • Setting & Addressing: ROBE Navigation System 2 (RNS2)
    • Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
    • Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
    • REAP™ - Robe Ethernet Access Portal
    • Wireless CRMX™ technology from Lumen Radio: On request
    • DMX Protocol modes: 3
    • Control channels: 35, 24, 39
    • Pan/Tilt resolution: 16 bit
    • Colour mixing: 8 or 16 bit (internal 18 bit)
    • Variable CCT: 8 bit
    • Internal barndoor module movement & rotation: 8 bit
    • Frost: 8 bit
    • Zoom: 8 or 16 bit
    • Edge colour correction: 8 bit
    • Dimmer: 8 or 16 bit (internal 18 bit)
  • Movement

    • Pan movement: 540°
    • Tilt movement: 265°
    • Movement control: Standard and Speed
    • Controllable speed of Pan/Tilt movement
    • Automatic Pan/Tilt position correction
    • EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending)
  • Internal Barndoors

    • Blades: 4 blades, each with separate movement control
    • Rotation: +/- 90° module rotation
  • Thermal Specification

    • Maximum ambient temperature: 45°C (113°F)
    • Maximum surface temperature: 70°C (158°F)
    • Minimum operating temperature: -5°C (23°F)
  • Electrical Specification and Connections

    • Power supply: Electronic auto-ranging
    • Input voltage range: 100-240 V, 50/60 Hz
    • Power consumption: maximum 750 W at 230 V / 50 Hz (all LEDs On)
    • Typical power consumption: 160 - 215 W (one colour = full)
    • Power in connector: Neutrik powerCON TRUE1
    • DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
    • Ethernet port in: RJ45
  • Approvals

    • CE Compliant
    • cETLus Compliant
  • Mechanical specification

    • Height: 712 mm (28") - head in vertical position
    • Width: 400 mm (15.7")
    • Depth: 258 mm (10.2") - head in vertical position
    • Weight: 22.6 kg (49.8 lbs)
    • Ingress protection rating: IP20
  • Rigging

    • Mounting positions: Horizontally or vertically
    • Universal operating position
    • Mounting points: 2 pairs of 1/4-turn locking points
    • 2x Omega adaptors with 1/4-turn quick locks
    • Safety cable attachment point
    • Pan and Tilt transport locks
  • Included Items

    • User Manual
    • Omega Adaptor CL-regular 2 pcs
    • Power cord including powerCON TRUE1 In connector
    • Gel frame adaptor
    • Top hat: 10980535 TopHat for T1/Esprite Wash
  • Accessories

    • Gel frame: 10980452
    • Module of PC lens for T1 Fresnel: 10980449
    • Doughty Trigger Clamp: 17030386
    • Safety wire 35 kg: 99011963
    • Single Top Loader Case: 10120244-03
    • Dual Top Loader Case: 10120245-03
    • Foam Shell: 20020340-01
  • Legal

    • T1 Fresnel™ is a Trademark of Robe lighting s. r. o.
    • T1 Fresnel™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents
T1 Fresnel™


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris ornare magna vel elit sodales, aliquam dapibus arcu vestibulum.


Here you can find all technical and marketing documents related to this product.