Time to uplift your footlights and make those feet shine! With its sleek, low design, our IP65-rated FOOTSIE Slim, with reduced footprint takes footlights into the modern age.

Without the cable tray, while retaining all the popular features of the FOOTSIE range, the FOOTSIE Slim takes up even less stage space!

Removing the visual barrier between audience and performer, this showstopper, with its low laying 52 mm high design, allows you to see all of the performer and watch those toes tapping!

Available in classic, balletic-like Warm White with a CRI greater than 90; tuneable white from 2.700K – 6.500K, or RGBW for all colours, including infamous up-lit horror looks, the IP65-rated FOOTSIE delivers LED foot lighting, whatever the production type or weather.

With easy, fast connection between fixtures, including corner pieces of various angles, FOOTSIE Slim keeps the LEDs evenly spaced to provide the smoothest wash with continuous runs across your stage or down your runway.

For run flexibility, FOOTSIE Slim is available in two lengths. The shorter FOOTSIE1™ Slim has two individually controlled zones within its 600 mm, while the longer 1.200 mm FOOTSIE2™ Slim has four zones.

FOOTSIE Slim features an innovative SPREAD™ (Shield Protection, Reflection Elimination, Diffusion), an attachable shield can be installed in position. The Shield covers direct viewing of the led sources from the side of audience (Patent pending). Providing additional softening and beam spread control optional, easily insertable medium and wide diffusion filters are available.

The patented design provides easy and instant access through the top and bottom lids to the fixture display, power supply and other cables, such as microphone or monitor speakers. We have included half circular ports in the top and base lids, giving access to these wherever needed on the stage. Power and data connections are via IP65-rated PowerCON True1 and DMX 5-pin IN and OUT connectors.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even without power, directly from your mobile device using the Robe Com app.

A unique safety feature, BluMark™ allows a low-level blue LED indication of stage edges without affecting lighting states. These separate, low-output LEDs provide an edge indication when performers become blinded due to snap blackouts. Controlled from your console, BluMark™ can be turned on/off as required.

For performers to accurately take positions on stage FOOTSIE Slim contains PIP™ - Performer Indication Points (Patent pending). Individually controlled RGB LEDs, at 10 cm spacing provide performers with discrete alignment points.

Convectionally cooled, FOOTSIE Slim is perfect for theatres, concert stages, fashion show catwalks or corporate events, letting your performers step out in style, indoors or out!

FOOTSIE – Toe tapping style, whatever the weather!

Light source

48 x RGBW/TW/WW LED single chip

Light output

4.940 lm

Zoom range

Asymmetrical field angle 55° x 50°

Innovations

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

Robe NFC controller and app

The Robe COM application is an app based on NFC (Near Field Communication). It can be used to access to fixture’s settings of our NFC-based navigation display systems as well as reading out data of our TE™ Transferable Engines.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

Cpulse™ – Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency, from either the fixture's onboard display or remotely via DMX. By frequency manipulation in a range from 800 Hz to 25 kH, you ensure no flicker will be visible on any camera system including the latest HD & UHD models, ready for 8K and 16K. This means our fixtures can be used with all the latest cameras types for TV, video and film applications.

+ - Green Correction

Green is a crucial colour for the TV and broadcast industry. To address this, Robe has incorporated a dedicated +/- green control channel in the fixtures featuring MSL™ Multi-spectral LED light sources, utilizing innovative algorithms. This allows precise and consistent adjustments of green content across the light beam. This seamless control offers vision controllers significantly greater flexibility in challenging lighting applications.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

BluMark™

Our Footsie™ footlight range of fixtures addresses the risk of performers becoming disoriented when the stage goes dark. BluMark™ provides a visual edge-of-stage indication line. Separate from the standard LED array, this line of blue LEDs can be adjusted to any output level, allowing it to unobtrusively blend seamlessly with varying ambient light conditions while still providing a clear visual boundary for performers.

PIP™ – Performer Indication Point

Eliminating the necessity for conspicuous stage markings, PIP™ (Performer Indication Point) RGB LEDs positioned every 10 cm within the fixture offer precise and consistent reference points for performers to locate their positions on stage.

Pixel Follower

Do you want to draw even more attention to a performer illuminated by RoboSpot™ lighting? Now you can, with the Pixel Follower control option.

SPREAD™

Maximising versatility while removing distracting direct viewing of LEDs in our FOOTSIE footlight fixtures the patented SPREAD™ system (Shield Protection, Reflection Elimination and Diffusion) can be stored within the fixture housing or deployed into position. With FOOTSIE Slim this is available as a separate attachment.

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 48 x 4W WW/TW or 3W RGBW High Power Single Chip LEDs

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

CRI:

WW 90+
TW 85+
RGBW 70+

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW/CMY or TW

4 individually controllable LED zones

+ - Green correction function

CCT:

WW 3000K
TW Variable 2.700K - 6.500K
RGBW Variable 2.700K - 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)

DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Pre-programmed random strobe & pulse effects

Electronic strobe effect with variable speed up to 20 Hz

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Extremely quiet operation suitable for all types of production in Theatre and TV

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

BluMark™ safety low-level blue LED indication of stage edges without affecting lighting states

PIP™ - Performer Indication Point – separately controlled RGB LEDs at 10 cm spacing provide performers with alignment points (Patent pending)

Control and programming

Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 3 editable programs (each up to 40 steps)

NFC app controller

Wireless CRMX™ technology from Lumen Radio

Protocols: USITT DMX-512, RDM

DMX Protocol modes: 3

Control channels:

WW: 1, 13, 26 channels
TW: 2, 20, 33 channels
RGBW: 5, 36, 49 channels

RGBW / CMY: 8 or 16 bit

Variable CCT: 8 bit

+ - Green correction: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Noise Levels

Thermal specification

Electrical specification and connections

Mechanical specification

Included items

Optional accessories

Diffusion filter medium: 10980821

Diffusion filter wide: 10980823

Angled corner 15°: 10980983

Angled corner high 15°: 10980987

Angled corner 30°: 10980984

Angled corner high 30°: 10980988

Angled corner 60°: 10980985

Angled corner high 60°: 10980989

Angled corner 90°: 10980986

Angled corner high 90°: 10980990

End cap:

R: 10980991
L: 10980992

Eight/Quad Top Loader Case ROBIN Footsie1 / Footsie2 slim: 10120351

Power cord including powerCON TRUE1 In connector EU: 13052276-01

Power cord including powerCON TRUE1 In connector US: 13052277-01

Legal

Related News

6 / 17 / 2025

Robe Lands Huge Order to Transition Estonian Theatres to LED

Robe’s Estonian distributor, Tallin-based E&T, is in the final stages of delivering an enormous order for moving and LED lights for 10 major theatres across the country, where all forms of live performance are strongly engrained in Estonian culture, and being entertained by theatre is a hugely popular activity.

2 / 28 / 2025

Robe Helps New Year’s Eve Live: Nashville’s Big Bash Go Large

Nashville – well known as a vibrant and major hub for the production and live entertainment industry – staged its own superlative concert – “Jack Daniel’s New Year’s Eve Live: Nashville’s Big Bash” – at Bicentennial Capitol Mall State Park to celebrate the new year rollover, featuring an impressive artist lineup and an eye-popping lighting and production design created by Robert W. Peterson of Real World Lighting.

12 / 2 / 2024

Robe at LDI 2024

Robe rocks back to Las Vegas for the 2024 Live Design International (LDI) show where the leading moving light manufacturer will be launching two exciting new products, the T.5 Profile – a smaller version of the acclaimed T1 – and the LedPOINTE, the new LED member of the famous Pointe family.

9 / 13 / 2024

Robe Bounces into Fifth Dimension at Brilliant PLASA 2024 Expo

Robe lighting enjoyed a brilliant PLASA 2024 expo in London Olympia, tapping into the hustle and energy of the show which is again a vibrant landmark on the UK production technology industry calendar.